Chapter 23
Kerio VPN
340
7.
Allow traffic between the local and the remote networks. To allow any traffic, just add the
created VPN tunnels to the
Source
and
Destination
items in the
Local traffic
rule. Access
restrictions options within VPN are described by the example in chapter
.
8.
Test reachability of remote hosts in both remote networks. To perform the test, use the
ping
and
tracert
system commands. Test availability of remote hosts both through IP
addresses and DNS names.
If a remote host is tested through IP address and it does not respond, check configuration
of the traffic rules or/and find out whether the subnets do not collide (i.e. whether the
same subnet is not used at both ends of the tunnel).
If an IP address is tested successfully and an error is reported (
Unknown host
) when a cor-
responding DNS name is tested, then check configuration of the DNS.
The following sections provide detailed description of the
Kerio VPN
configuration both for
the headquarter and the filial offices.
Headquarters configuration
1.
Install
WinRoute
(version
6.1.0
or higher) at the default gateway of the headquarters
network.
2.
Use
Network Rules Wizard
(see chapter
) to configure the basic traffic policy in
WinRoute
.
To keep the example as simple as possible, it is supposed that the access from the local
network to the Internet is not restricted, i.e. that access to all services is allowed in step 4.
Figure 23.32
Headquarters — no restrictions are applied to accessing the Internet from the LAN
Содержание Firewall6
Страница 1: ...Kerio WinRoute Firewall 6 Administrator s Guide Kerio Technologies...
Страница 129: ...8 5 HTTP cache 129...
Страница 404: ...404...