Kerbl 10810, Инструкция по эксплуатации

Страница: 32 / 64

32
3.2 Control elements
Clicking with the left-hand mouse button on the window
of the camera in question displays a control element with
various control options:
The control options framed in red only apply to
IPCam 360° HD (#10811). These functions relate
to the movement of the camera via remote control.
The explanation of the function can be made to appear
by briefly holding the mouse point over the icon.
The menu is clear and self-explanatory.
Further information and assistance in the event of
installation problems can be obtained here:
E-Mail: support@kerbl.com
Tel: +49 8086 933-545
CE Mark / CE Declaration of Conformity
Albert Kerbl GmbH hereby declares that the IPCams 10810 and 10811
comply with the 2014/53/EU Directive. The full text of the EU Declaration
of Conformity can be found on the following website: http://www.kerbl.com/ftp/
prod_documents/10810=10811=Konformitätserklärung_DE_EN.pdf
Electrical waste
It is up to the operator to dispose of the IPCam responsibly in accordance
with local regulations. Consult the relevant regulations for your country. The
device must not be disposed of in household waste. Under the terms of the
EU Directive on the disposal of old electrical and electronic equipment, the
device can be taken to local authority-run refuse sites or recycling plants free of charge,
or returned to dealers who offer a returns service. Correct disposal protects the environ-
ment and prevents any possible harmful impacts on humans and the environment.
Warranty card
Based on our General Terms and Conditions of Business, we offer a 1 YEAR WARRANTY
for this device covering damage caused by material or manufacturing defects. This
warranty begins on the date of purchase.
The warranty does not cover:
1. damaged caused by natural wear and tear (wear parts, sliding parts), excessive
strain and incorrect use (non-compliance with operating instructions).
2. Damage caused by force majeure or sustained during transport.
3. Damage to rubber parts, e.g. on connecting lines. Warranty repairs are only carried
out by the manufacturing plant or an authorised contracted workshop. The manufac-
turer reserves the right to reject any warranty claims in the event of non-compliance.
The device must for this purpose be returned to the point of sale, at the risk of the
device owner, complete, packaged and with sufficient postage, including the original
invoice and the warranty card. (address see dealer stamp). Please provide as much
information as possible on the nature of the problem. Costs incurred as a result of
unjustified defect claims will be invoiced to the device’s owner.