Kerbl 10810, Инструкция по эксплуатации

Страница: 26 / 64

26
Camera setup and configuration
1. Connecting the camera to the network
When using for the first time, please connect the camera
and the computer to a router using network cables.
Ensure that the router is switched on and that, when the
RJ-45 cable is connected to the camera, the yellow and
green light illuminates (network control lights). Only use
the cable supplied to provide power to the camera so as
to avoid damaging the device!
The camera can be returned to the factory settings by
pressing the „Reset“ button (for at least 10 seconds).
The „Reset“ button is located on the underside of the
device.
2. Connect the camera with an Android /
iOS device (smartphone, tablet, etc.)
2.1 Software download
The software needed (Eye Cloud) can be downloaded via
the AppStore/Google Play or via the www.kerbl.de/service
website.
You can then click „Download“ under the relevant icon or
use a smartphone scanner to scan the QR code.
2.2 Registration
Register as detailed in the instructions contained in the
application with your e-mail address and password