41
LDB-ST1LE Batcher
8.39” (235mm)
4.00” (101.7mm)
1.06”
(27mm)
1.10”
(28mm)
7.28”
(185mm)
4.92”
(125mm)
0.75”
(19mm)
M20 (5 places)
M16
Four Panel Screws
8.3 Internal Fuse Replacement
Instructions:
1. Make sure you follow proper E.S.D. Precautions. All persons performing this replacement
must follow proper grounding procedures.
2. Turn the power to the unit off.
3. Remove the four machine screws (see fig. 1) which hold the front panel to rear of case
4. The front panele should detach from the rest of the case. With the rear section of the case
exposed the fuse will be located at the lower right of PC board.
5. Locate the Fuse F1 (see fig. 2) and unplug the fuse from its socket.
6. Insert the new fuse into the socket. Insure that the pins are fully inserted and straight.
7. Reassemble the case and install the four machine screws which join the two sections of the
case.
8. Turn the unit back on.
Fuse Specifications:
110 VAC Power:
160mA/250V, TD Wickman 19372-030-k or equivalent
220 VAC Power: 80mA/250V, TD Wickman 19372-026-k or equivalent
12/24 VDC Power: 800mA/250V, TD Wickman 19374-046-k or equivalent
fig. 1
fig. 2
FUSE
fuse
