KEP ES-756, Инструкция по установке и эксплуатации

Страница: 19 / 22

15
REMARKS
DISPLAY PRESS
SETTING THE PRESETS & PANEL LOCK
SETTING
THE
PRESETS
PRE A
Press any key to view
or change existing
value
PRE B
Press any key to view
or change existing
value
CoDE
Press any key to enter
the 5-digit lock code.
LoC
or
UN LoC
PRE A = Preset A (Final Preset); The
set point at which output A will trigger.
If the displayed value is not the de sired
preset, press the key(s) under the digit
to be changed.
PRE B = Preset B (Prewarn); The set
point at which output B will trigger. If
the dis played value is not the de sired
preset, press the key(s) under the digit
to be changed.
Key in the lock code (see pro gram ming
step 3) by pressing the keys under the
digits to be changed. Each time a key
is pressed the digit will increment one.
Press the RST/EN TER key to enter the
displayed code.
After the code is entered the unit will
display LOC (unit is locked) or UN LOC
(unit is un-locked). This message will
be displayed for approximately 3 sec-
onds before the unit returns to the run
mode. If an invalid code is entered, no
message is displayed; try again.
Press LOCK 3 times within 5 seconds
(If LOCK is pressed once, unit freezes display)
SETTING
THE
LOCK
STATUS
PRE A
PRE B
LOCK
LOCK
LOCK
ENTER