Kenwood XD-981MD Скачать руководство пользователя страница 83

Страница: 83 / 84

XD-981MD (En)

Preparation section

Basic

section

Application section

Knowledge sections

In case of difficulty

Remedy

Cause

Symptom

Clean the head referring to “Maintenance”.

Try another tape.

Play a recorded tape.

Close the tray completely.

Press operation keys in more than a few
seconds after closing the cassette holder.

Press operation keys after waiting for more
than 4 seconds.

Insert a tape.

Try another tape.

Change the tape transport direction or re-
verse the tape insertion orientation.

Refer to “Searching for the desired music
program (DPSS)”.

Press in stop mode.

Reset the microcomputer.

Clean the head referring to “Maintenance”.

Try another tape.

Demagnetize the head referring to “Main-
tenance”.

Install the system at a distance from other
electric appliances and TV.

Set the Dolby NR to on.

Clean the head referring to “Maintenance”.

Wind the tape again by fast forwarding,
rewinding or playing from an end to the
other.

Use a cassette with an unbroken recording
protect tab or block the hole.

Close the holder completely.

Select the source to be recorded with the
input selector key.

Change the tape transport direction of deck
B or reverse the tape insertion orientation.

Sound cannot be produced by pressing
the play key or no operation occurs even
when an operation key is pressed.

No operation occurs even when an opera-
tion key is pressed.

The DPSS malfunctions.

The cassette holders cannot be opened by
pressing the

PUSH OPEN area.

Sound is harsh or high frequencies are not
reproduced.

Sound is distorted.

Noise is noticeable.

Sound vibrates.

Recording cannot be started by pressing
the record key.

∞

›

The head is dirty.

The tape is wound too tight due to irregular
winding.

A nonrecorded tape is played.

The cassette holder is not closed com-
pletely.

The operation key is pressed immediately
after closing the cassette holder.

The operation key is pressed in less than 4
seconds after turning the power ON.

A tape is not inserted in the unit.

The tape is wound too tight due to irregular
winding.

The tape is fully wound to one of the reels.

The tape used is not suitable for DPSS, for
example the spaces between tunes may be
too short.

The key is pressed during recording or play-
back.

The microcomputer is malfunctioning due
to external noise.

The head is dirty.

The tape is stretched or shrunk.

The tape being played was recorded with
distorted sound.

The tape head is magnetized.

External noise is induced.

A tape recorded with Dolby NR ON is played
with Dolby NR OFF.

The capstans or pinch rollers are dirty.

The tape is wound irregularly.

The recording protect tab of the cassette
has been broken.

The cassette holder is not closed com-
pletely.

The

TAPE

input is selected.

The tape is fully wound to one of the reels.

Cassette deck

Содержание XD-981MD





















































































Результаты поиска

Содержание XD-981MD

Отзывы:

Похожие инструкции для XD-981MD

Бренды по названию

Популярные бренды

Kenwood XD-981MD, Инструкция по эксплуатации

Результаты поиска

Содержание XD-981MD

Отзывы:

Похожие инструкции для XD-981MD

Бренды по названию

Популярные бренды