Kenwood XD-981MD Скачать руководство пользователя страница 82

Страница: 82 / 84

XD-981MD (En)

Preparation section

Basic section

Application section

Knowledge sections

In case of difficulty

Remedy

Cause

Symptom

CD player section

Place the disc properly, with the label side
facing upward.

Place the disc properly.

Clean the disc referring to “Disc handling
precautions”.

Try another disc.

Refer to “Caution on condensation” and
remove the condensation by evaporation.

Place a disc in the CD player.

Press the

key.

Clean the disc referring to “Disc handling
precautions”.

Try another disc.

Clean the disc referring to “Disc handling
precautions”.

Try another disc.

Install the unit in a place not subject to
vibrations.

A CD is placed in the player but it cannot
be played.

Sound is not produced.

Sound skips.

The disc is placed upside down.

The disc position is displaced.

The disc is extremely dirty.

The disc is scratched.

Dew is condensed on the optics lens.

The disc has not been placed.

The player is not put to the play mode.

The disc is extremely dirty.

The disc is scratched.

The disc is dirty.

The disc is scratched.

The player is subject to vibration.

CD player section (in regard to message display)

Displayed Message

Meaning

Action

Err** (** indicates a number)

This indicates some trouble. The number
differs according to the trouble contents.

Return to normal condition is made by
switching the unit off and then on again.

Remote control unit

Symptom

Cause

Remedy

Remote control operation is not possible.

Batteries are exhausted.

The remote control is too far away from the
system, the controlling angle is deviated or
there is an obstacle in between.

There is no CD or MD set in the component
to be played.

Replace with new batteries.

Operate the unit inside the remote control-
lable range.

Set a CD or MD in the component to be
played.

Содержание XD-981MD





















































































Результаты поиска

Содержание XD-981MD

Отзывы:

Похожие инструкции для XD-981MD

Бренды по названию

Популярные бренды

Kenwood XD-981MD, Инструкция по эксплуатации

Результаты поиска

Содержание XD-981MD

Отзывы:

Похожие инструкции для XD-981MD

Бренды по названию

Популярные бренды