Kenwood XD-981MD, Инструкция по эксплуатации

Страница: 32 / 84

XD-981MD (En)
32
Preparation section
Basic section
Application section
Knowledge sections
Let's put out some sound
In regard to track numbers at the time of recording How to use the REC INPUT SELECT key
Digital recording is executed automatically when the
input selection is CD. For analog recording from a CD, use
the REC INPUT SELECT key.
Each press switches the modes as follows.
1
“DIGITAL” is lit : Digital recording
2
Not lit : Analog recording
0 3
0
2
0 1
REC INPUT
SELECT
At the time of recording from a CD, the track number may be incremented when CD playback starts. This occurs because of a signal included
in the digital signal from the CD. Delete unwanted track numbers under reference to “TRACK ERASE or ALL ERASE”.
Á
Note Note
Press during recording.
”DIGITAL” goes off
Let's recording
When a part without sound continues for 2 sec. or more during
recording, the track number is automatically increased by “1”
when the next sound enters. When classic music continues with
low sound, the track number may be increased by “1”. The er-
roneously set track number can be erased later.
When it is desired to increase the track No. during recording,
press the TRACK EDIT key during recording to record a track
No. at that position.
The track numbers are used at the time of playback to find the
start of tracks, for programming, etc.
TOTAL DIGITAL TITLE SEARCH
TUNED STEREO
0 0 0
:
00
.
0 0 1
C D 1 D I S C : 2 4
0
3
0
2
0 1
TRACK EDIT
÷
With digital recording from a CD, the track number is increased when
the track changes. (The track number is not increased even when there
is a part without sound in excess of 2 sec in the track.)