24
EN
Listening to radio broadcasts
AUTO/MONO
BAND
INPUT SELECTOR
MULTI CONTROL
@
/
#
TUNING
1
/
¡
TUNER
BAND
AUTO/MONO
MULTI CONTROL
%
/
fi
Tuning (non-RDS) radio stations
The receiver can store up to 40 stations in the memory and recall them by one-touch operation. Radio stations can be classified into RDS (Radio Data System) stations
and other stations. To listen to or store RDS stations in the preset memory see "
Using RDS (Radio Data System) (For Europe and Australia)
".
§
1
Use the INPUT SELECTOR key (or the TUNER key) to select
the tuner.
2
Use the BAND key to select the desired broadcast band.
Each press switches the band.
3
Use the AUTO/MONO key to select the desired tuning method.
Each press switches the tuning method to either auto or manual tuning.
1
Auto tuning
:
The "
AUTO
" indicator lights up.
2
Manual tuning
:
The "
AUTO
" indicator goes off.
÷
Normally, set to "
AUTO
" (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
4
Use the MULTI CONTROL button (or the MULTI CONTROL
%
/
fi
keys, TUNING
1
/
¡
keys) to select the station.
Auto tuning :
The next station is tuned automatically.
Manual tuning :
Use the
MULTI CONTROL
button (or the
MULTI CONTROL
%
/
fi
keys) to select the desired station.
"
AUTO
" indicator lights up in the display.
"
TUNED
" indicator is displayed when a
station is received. "
ST.
" indicator lights
when a broadcast is being received in
stereo.
Presetting radio stations
AUTO/MONO
BAND
MEMORY
INPUT SELECTOR
MULTI CONTROL
@
/
#
Collective presetting of stations
(Except for Europe and Australia)
1
Use the INPUT SELECTOR key (or the TUNER key) to select
the tuner.
2
Use the BAND key to select he broadcast band to "FM".
3
Press and hold the MEMORY key for more than 2 seconds.
The "
AUTO
" display and "
PRESET
" display appear alternately.
÷
A maximum of 40 stations of the band presently being
received will be preset.
÷
Use the Manual Preset function if a desired FM station
cannot be preset using the Auto Preset function or when it
is required to preset AM stations.
Presetting radio stations manually
1
Tune to the station you want to store.
2
Press the MEMORY key while receiving the station.
Proceed to step
3
within 20 seconds. (If more than 20
seconds elapse, press the MEMORY key again).
3
Use the MULTI CONTROL button (or the MULTI CONTROL
%
/
fi
keys) to select one of the station presets (1 – 40).
4
Press the MEMORY key again to confirm the setting.
• Repeat steps
1
,
2
,
3
and
4
to store as many stations as
necessary.
• If you store a station at a previously used preset, the old
station will be replaced by the new one.
