Kenwood VRS-6200, Инструкция по эксплуатации

Страница: 17 / 40

17
EN
Preparing for playback
6
Use the MULTI CONTROL button (or the MULTI
CONTROL
%
/
fi
keys) to select the appropriate
front speakers setting.
1
" FRNT LRG":
Large front speakers are connected to the receiver.
2
" FRNT NML ":
Average size front speakers are connected to the
receiver.
÷
When the subwoofer setting is " SUBW ON ", front speakers
setting is " FRNT LRG " and a stereo source is played, the low
frequencies may be reproduced through the front speakers and
no audio output from the subwoofer in certain listen modes. In
this case, set the subwoofer re-mix setting in step
$
to " REMIX
ON " to output the low frequencies from the subwoofer.
7
Press the SETUP key to accept the setting.
÷
The center speaker setting indication " CNTR " appears.
8
Use the MULTI CONTROL button (or the MULTI
CONTROL
%
/
fi
keys) to select the appropriate
center speaker setting.
1
" CNTR LRG ":
*
A large center speaker is connected to the receiver.
2
" CNTR NML ": An average size center speaker is
connected to the receiver.
3
" CNTR OFF " :
When no center speaker is connected.
*
" CNTR LRG " cannot be selected when the front
speakers have been set to " FRNT NML ".
9
Press the SETUP key to accept the setting.
÷
The surround speaker setting indication " SURR " appears.
0
Use the MULTI CONTROL button (or the MULTI
CONTROL
%
/
fi
keys) to select the appropriate sur-
round speaker setting.
1
" SURR LRG ":
*
Large surround speakers are connected to the receiver.
2
" SURR NML ":
Average size surround speakers are connected to the
receiver.
3
" SURR OFF " :
When no surround speakers are connected.
*
" SURR LRG " cannot be selected when the center
speaker have been set to " CNTR NML " or " CNTR OFF ".
÷
When " SURR OFF " is selected and the selection is estab-
lished by pressing the SETUP in step
!
below, the procedure
jumps to step
$
. However, if the subwoofer setting is
" SUBW OFF ", you can complete the speaker setup and
proceed to the speaker volume level adjustment in step
5
.
!
Press the SETUP key to accept the setting.
÷
The surround back speaker setting indication " BS " appears.
@
Use the MULTI CONTROL button (or the MULTI
CONTROL
%
/
fi
keys) to select appropriate sur-
round back speaker setting.
1
" BS LRG ":
*
Large surround back speaker is connected to the re-
ceiver.
2
" BS NML ":
Average size surround back speaker is connected to the
receiver.
3
" BS OFF ":
When no surround speakers are connected.
*
" BS LRG " cannot be selected when the surround
speaker have been set to " SURR NML ".
#
Press the SETUP key to accept the setting.
÷
The subwoofer re-mix setting indication " SW RE-MIX " appears.
$
Use the MULTI CONTROL button (or the MULTI
CONTROL
%
/
fi
keys) to select the appropriate
subwoofer re-mix setting.
If " REMIX ON " is selected as the subwoofer re-mix setting,
the low frequencies are enhanced by adding the low fre-
quencies of other channels to the subwoofer channel or
adding the low frequencies of the subwoofer to other
channels depending on the speaker setup.
1
" REMIX ON ": Subwoofer re-mix setting mode to the
receiver is ON.
2
" REMIX OFF ": Subwoofer re-mix setting mode to the
receiver is OFF.
÷
If subwoofer is turned " SUBW OFF ", subwoofer re-mix
setting is not visible.
%
Press the SETUP key to accept the setting.
Continued to next page