19
EN
Preparing for playback
Input level adjustment (analog sources only)
If the input level of an analog source signal is too high, the "
CLIP
" indicator
will lights up. Adjust the input level.
1
Press the SOUND key repeatedly until the "INPUT"
indication appears.
2
Use the MULTI CONTROL button (or the MULTI
CONTROL
%
/
fi
keys) to adjust the input level.
÷
The adjustment mode is displayed for approximately 20
seconds.
÷
The input level may be adjusted to any one of three settings:
0dB, -3dB, and -6dB. (The initial setting is 0dB.)
÷
You can store a separate input level for each input selector.
3
Press the SOUND key again to return to the input
indication.
7
Adjust the LFE LEVEL (Low Frequency Effects level)
Adjust the level of the low-frequency fields effect (LFE) signal, which is
the signal used exclusively for giving the field effect of bass tone, in the
Dolby Digital or DTS signal.
1
Use the MULTI CONTROL button (or the MULTI
CONTROL
%
/
fi
keys) to select "LFE LEVEL" on
setup displays, and press the SETUP key.
2
Use the MULTI CONTROL button (or the MULTI
CONTROL
%
/
fi
keys) to adjust the LFE LEVEL.
÷
The LFE LEVEL is adjusted from 0dB to -10dB in 1dB
step decrements.
3
Press the SETUP key to accept the setting.
4
Setup is complete when the EXIT indication appears.
5
Press the SETUP key to exit the SETUP mode.
