10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
FRONT PANEL
Note: This section describes only the main functions of the front panel
controls and buttons. For the functions not described here, you will find
explanations in the appropriate sections of this manual.
q
q
q
q
q
CALL button
Recalls the Call channel {page 33}. Also starts or stops
Call/VFO Scan {page 48} when in VFO mode, or
Call/Memory Scan {page 48} when in Memory Recall
mode.
w
w
w
w
w
VFO button
Selects the VFO mode {page 8}. In this mode you can
change the operating frequency, using the Tuning control
or Mic [UP]/[DWN]. Also provides:
•
VFO Scan start/stop to scan the entire VFO range {page 44}.
•
Program Scan start/stop to scan a programmed range of
frequencies {page 46}.
e
e
e
e
e
MR button
Selects the Memory Recall mode {page 31}. In this mode
you can change memory channels, using the Tuning
control or Mic [UP]/[DWN]. Also starts or stops Memory
Scan {page 44}.
r
r
r
r
r
Tuning control
Selects:
•
Operating frequencies when in VFO mode.
•
Memory channels when in Memory Recall mode {page 31}.
•
Menu Nos. when in Menu mode {page 19}.
This control is used for various other selections.
t
t
t
t
t
MHz button
Selects the MHz mode. In this mode you can change the
operating frequency in 1 MHz steps or 10 MHz steps
{page 17}, using the Tuning control or Mic [UP]/[DWN].
Also starts or stops MHz Scan {page 47}.
PWR
PWR
CALL
CALL
