1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
35
■
Partial Reset (VFO)
Use to initialize all settings except the memory
channels, the Call channel, the PM channels, and
Memory Channel Lockout.
1 Press [VFO]+ POWER ON.
•
A confirmation message appears.
("VFO Reset? Press [VFO]")
•
To quit resetting, press any key other than [VFO].
2 Press [VFO] again.
■
Full Reset (Memory)
Use to initialize all settings.
1 Press [MR]+ POWER ON.
•
A confirmation message appears.
("All Reset? Press [MR]")
•
To quit resetting, press any key other than [MR].
2 Press [MR] again.
Note: You can also do Partial Reset or Full Reset by pushing the RESET
switch on the transceiver {page 90}.
INITIALIZING MEMORY
If your transceiver seems to be malfunctioning, initializing
the transceiver may resolve the problem.
Remember that initializing the memory channels requires
that you re-enter memory channel data again after the
initialization. On the other hand, initialization is a quick way
to erase all data from all channels.
Note: While using the Channel Display or All Lock function, you cannot
do Partial Reset nor Full Reset.
VHF Band Defaults
UHF Band Defaults
VFO
Frequency
144 MHz
144 MHz
Version
U.S.A./
Canada
Europe/
General
Tone
Frequency
88.5 Hz
88.5 Hz
Frequency
Step
5 kHz
12.5 kHz
VFO
Frequency
440 MHz
430 MHz
Version
U.S.A./
Canada
Europe/
General
Tone
Frequency
88.5 Hz
88.5 Hz
Frequency
Step
25 kHz
25 kHz
