TH-K2AT/K2E/K2ET
55
BPF
Q9
Q11
Q16
Q10
Q12
Q17
BPF
Q24
MIC AMP
vco
ANT FILTER
50
Ω
ANT
9.74Vrms
0.84Vrms
-18.68dBm
10.50dBm
4.17dBm
15.17dBm
11.00dBm
24.67dBm
20.83dBm
30.50dBm
AF(1kHz)
RF(145.99MHz)
ANT FILTER
-59.33dBm
-62.50dBm
-31.83dBm
-47.83dBm
vco
-35.83dBm
-17.33dBm
FM IC
IC3
IC6
AMP
RF(145.99MHz)
AF(1kHz)
IF(38.85MHz)
-53.00dBm
0.26Vrms
12.09mVrms
0.66Vrms
0.58Vrms
MIC
ANT
SP
-9.83dBm
IC16
LE
V
E
L D
IA
G
R
A
M
All voltage levels must be measured at High pow er transmission.
The RF and IF sections are measured by using a spectrum analyzer.
After setting the standard (1 kHz, 3 kHz Dev.) deviation, each voltage
of the AF section is measured by using an AF VTVM or osciloscope.
The level for each point is measured w ithout removing parts or cutting
the pattern.
All voltage levels must be measured after setting the AF output volt-
age at 0.58V rms.
The RF and IF sections are measured by using a spectrum analyzer.
Each voltage of the AF section is measured by using an AF VTVM or
osciloscope.
The level for each point is measured w ithout removing parts or cutting
the pattern.
Transmitter Section
Receiver Section