R-SE9 T/ DP-SE9 / X-SE9 (En)
27
P
re
pa
ra
tio
n
se
cti
on
B
as
ic
s
ec
tio
n
K
no
w
le
dg
e
se
cti
on
s
Hearing sound
A
pp
lic
at
io
n
se
ct
io
n
Collective presetting of stations (auto preset)
÷
Repeat steps
123
to preset other stations.
÷
If several stations are preset under the same number, the
previous memory is replaced w ith the latest memory
contents.
÷
When a key is held depressed, preset stations w ill be
skipped at an interval of about 0.5 second.
÷
Preset calls also can be made by numerical input via the
numeric keys on the remote control. When the key for
the tens digit has been pressed erroneously at the time
of input, press the +10 key several times to return to the
original display and then enter the number again.
÷
Normally, use the
AUTO (Auto tuning) mode.
Each press alternates the mode.
1
“AUTO” lit (Auto tuning)
2
“AUTO” not lit (M anual
tuning)
Select the tuning mode.
Use the manual tuning mode w hen reception is
noisy due to w eak reception. (In the manual mode,
stereo broadcasts are received in monaural.)
1
Press the “enter” key during reception.
2
Select one of the preset numbers from 1 to 40.
3
Press the “enter” key again.
Presetting is cancelled w hen no
operation is executed for 5 sec-
onds or more.
Presetting is cancelled w hen
no operation is executed for 5
seconds or more.
One-by-one presetting (manual preset)
÷
Up to 30 stations can be memorized.
÷
For use of the RDS function, stations must be memo-
rized by RDS auto presetting.
÷
RDS stations are given priority during auto presetting. If
there is memory left after presetting, the receiver contin-
ues presetting regular FM stations.
÷
For memorizing of stations other than RDS stations (FM ,
AM ), memorize the stations according to chapter “ One-
by-one presetting (manual preset)” .
Goes off
“
M EM O.” lights (for approx. 5 sec.)
1
Receive a FM broadcast.
2
Keep the "enter" key depressed (for 2 sec or
more).
During recording, the indica-
tor “A M EM O” flashes.
The “
TUNED” indicator lights
w hen a station is received.
Lights during stereo reception
Frequency display
enter
auto/mono
multi control
) -
8 9 ) )
.
TUNED
ST.
AUTO
MEMO.
MHz
) 3
8 9 ) )
.
TUNED
ST.
AUTO
MHz
F M
8 8 ) )
.
AUTO
MHz
F M
8 9 ) )
.
TUNED
ST.
AUTO
MHz
A
M E M O
AUTO
R-SE9T
R-SE9T
About display change during tuner reception
The display w ill change each time the DISPLAY
key is pressed.
1
Reception band/ Frequency
2
Preset number/ Frequency
3
Clock
enter
enter
T U N I N G
R-SE9T
“
TUNING” appears (for approx. 5 sec.)
The display w ill change each time the RDS
DISPLAY key is pressed.
1
PS (Program Service Name) Display
2
Reception band/ Frequency
http://www.usersmanualguide.com/
