TK-3201
5
■
Cautions for assembly
1. Attaching the positive terminal to the chassis.
Always attach the positive terminal to the chassis, using
the following procedures, before mounting the TX-RX unit
onto the chassis.
1. Remove the holder assembly
x
from the packing
z
of
the positive terminal.
2. Mount the packing of the positive terminal into the chassis
hole
c
.
3. Mount the holder assembly into the packing of the positive
terminal
v
.
DISASSEMBLY FOR REPAIR
■
Assembling the battery release lever
1. Place the lever
x
onto the stopper
z
.
2. Place the thick spring
c
onto the lever.
3. Hook the right and left ends of the thin spring
v
onto the
tabs of the stopper, then place the thin spring onto the
lever
b
.
4. Slide the shaft through the hole of the stopper and lever
n
.
2
1
3
4
2. Mounting the chassis to the case assembly.
1. Confirm that the waterproof packing attached to the
circumference of the chassis is securely inserted in the
groove of the chassis
z
.
2. Twist the speaker wires twice, then attach the speaker to
the speaker recess of the case assembly
x
. Make sure
the speaker is securely inserted.
4
5
3
1
6
2
3. Insert the antenna element into the cover
c
.
Caution:
Take care that the speaker lead wire is not caught
by the microphone element.
4. Press the chassis
v
and the case assembly together to
attach them.
Caution:
If the packing of the SP / MIC does not come to the
correct position after attaching the chassis to the
case assembly, reposition the packing with your
fingers.
3
3
1
2
Confirm that the waterproof packing is
securely inserted in the groove of the chassis.
4
4
