Kenwood NX-3720, Руководство по обслуживанию

Страница: 11 / 210

(No.RA054<Rev.001>)1-11
2.2.8.2 Data Writing
Before moving to next Zone/Channel, “Keep This Change?”
appears on the LCD, if you select “OK”, the new data is written
to memory. If you select “Cancel”, the new data not be written;
the new data will be erased.
•
The setup items for Front panel programming mode are as
follows.
*3: In "Channel Type" display, "Transmit Mode" can be
entered only when Mixed mode is selected.
• Button operation
No. Setup item Display Remarks
1 RX Frequency RX Frequency Receive Frequency
2 TX Frequency TX Frequency Transmit Frequency
3 Channel Type Channel Type Analog/NXDN/DMR
4 Transmit Mode
*3
Transmit Mode Analog/NXDN/DMR
5 Channel
Spacing
Channel Space Analog:
12.5kHz/20kHz/25kHz
Note: 20kHz is applied
for E type only.
NXDN:
6.25kHz/12.5kHz
DMR: 12.5kHz
6 RX Signaling RX QT/DQT Receive QT/DQT
7 TX Signaling TX QT/DQT Transmit QT/DQT
8 RX RAN RX RAN None, 1~63
9 TX RAN TX RAN None, 1~63
10 Color Code Color Code 0~15
11 Slot Selection Slot Selection Slot 1, Slot 2
12 Transmit Power Transmit
Power
Low/Medium/High
13 Channel Name Channel Name
No. Setup item Display Remarks
Button
\Item
Zone Select Channel Select RX Frequency TX Frequency Channel Type Transmit Mode
*5
Channel
Spacing
[ ] Decision Decision Decision Decision Decision Decision Decision
[ ] Unused Back to the
previous item Back to the
previous item Back to the
previous item Back to the
previous item Back to the
previous item Back to the
previous item
[ ] Unused Unused Go to the TX
Frequency Go to the RX
Frequency Unused Unused Unused
[ ] Exit panel
program mode Exit panel
program mode Exit panel
program mode Exit panel
program mode Exit panel
program mode Exit panel
program mode Exit panel
program mode
[

] Zone change Channel change Frequency up Frequency up Channel type
change Transmit Mode
Change Channel
Spacing Change
[

] Zone change Channel change Frequency down Frequency down Channel type
change
Transmit Mode
Change Channel
Spacing Change
[

] Unused Unused Frequency step
change Frequency step
change Unused Unused Unused
[

] Unused Unused Frequency step
change Frequency step
change Unused Unused Unused
MIC
Keypad
[0] ~ [9] Zone number
select Channel number
select Go to the direct enter mode Channel number
select
(1,2 or 3) Transmit Mode
number select
(1 or 2) Channel
spacing select
*4
MIC
Keypad [*] Decision Decision Decision Decision Decision Decision Decision
MIC
Keypad [#] Unused Back to the
previous item Back to the
previous item Back to the
previous item Back to the
previous item Back to the
previous item Back to the
previous item