16
English
English
17
PAR
iPod
VOICE
Press and hold to pairing mode.
Getting Started of Bluetooth
Easy Pairing function
1
Press and hold to enter easy pairing
mode
“PAIRING” is displayed.
■
■
Any of the following is displayed
depending on Bluetooth device
registration condition:
– “SEARCHING”: When registering a
Bluetooth device for the first time.
– “(device name)”: When a Bluetooth
device has already been registered.
– “DEVICE FULL”: When a maximum of five
Bluetooth devices have already been
registered.
■
■
To cancel the easy pairing mode, press .
When registering a Bluetooth device for the
first time (Registering a Bluetooth device)
2
“SEARCHING” is displayed.
Search for the Bluetooth device.
When search is completed, “FINISHED” is
displayed.
3
Turn the volume knob to select a
Bluetooth device name, press to confirm.
4
“CONFIRM DVC” is displayed.
If “PAIRING OK” is displayed, proceed to
step 7.
If “PIN CODE” is displayed, proceed to steps
5.
If “*** NG” is displayed, press the volume
knob. Proceed to steps 4.
5
Input the PIN code
■
■
To select the number, turn the volume
knob.
■
■
To move to the next digit, press
¢
.
■
■
To delete the last digit, press
4
.
6
Press the volume knob to transmit the
PIN code.
If “PAIRING OK” is displayed, registration is
completed.
When “CONFIRM DVC” is displayed, confirm
connection with a Bluetooth device
operation.
7
The receiver is connected to a Bluetooth
device, with “HF CONNECT” or “AUD
CONNECT” displayed, and exits the easy
pairing mode.
■
■
If an error code is displayed during paring,
see
.
■
■
If the error message appears even though
the PIN code is correct, try the procedure
mentioned in
.
When a Bluetooth device has already been
registered, or maximum of five Bluetooth
devices have already been registered
(Selecting a Bluetooth device)
2
“(device name)” or “DEVICE FULL” is
displayed.
3
Turn the volume knob to select a
Bluetooth device name.
■
■
To register a new Bluetooth device,
select “[NEW DEVICE]”, then go to “When
registering a Bluetooth device for the first
time.”
4
Press the volume knob.
5
Turn the volume knob to select the
profile for the device to connect.
■
■
“HANDSFREE”/ ”AUDIO”: The device can
be connected using either a hands-free
or audio profile.
“HF/AUD”: The device is can be connected
using both hands-free and audio profiles.
6
Press the volume knob to set up the
Bluetooth device.
■
■
“
✱
H
✱
A (device name)”: The selected
Bluetooth device is busy.
■
■
“-H-A (device name)”: The selected
Bluetooth device is on standby.
■
■
“ H A (device name)”: The Bluetooth
device is deselected.
• “H” (HFP) or “A” (A2DP) indicates the
corresponding profile.
7
Press to exit easy pairing mode.
Deleting the registered Bluetooth device
2
“(device name)” or “DEVICE FULL” is
displayed.
3
Turn the volume knob to select a
Bluetooth device name.
4
Press and hold the volume knob to delete
the selected Bluetooth device.
“DELETE” is displayed.
5
Turn the volume knob to select “YES”,
then press to confirm.
“COMPLETED” is displayed.
6
Press to exit easy pairing mode.
Registering from Bluetooth devices
(Pairing)
1
Press SRC to turn on the power.
2
Start registering this unit by operating
the Bluetooth device.
By operating the Bluetooth device, register
the hands-free unit or audio unit (pairing).
Select “KENWOOD BT CD/R-6P1” from the
list of found units.
3
Input the PIN code (“0000”) in the
Bluetooth device.
Check that registration is complete on
the Bluetooth device. PIN code is set to
“0000” as the default. You can change this
code. Refer to
[PIN CODE EDIT]
under
<Bluetooth Setup> (
).
4
By operating the Bluetooth device, start
hands-free connection.
■
■
If there are 5 or more Bluetooth devices
registered, you cannot register a new
Bluetooth device.
About the Cell-Phone
■
■
Version: Bluetooth Standard Ver. 3.0
Certified
■
■
Profile:
HFP (Hands Free Profile)
HSP (Headset Profile)
SPP (Serial Port Profile)
OPP (Object Push Profile)
PBAP (Phone book Access Profile)
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control
Profile)
For the cell-phones verified for compatibility,
access the following URL:
www.kenwood.com/cs/ce/bt/
■
■
The units supporting the Bluetooth
function have been certified for conformity
with the Bluetooth Standard following the
procedure prescribed by Bluetooth SIG.
However, it may be impossible for such
units to communicate with your cell-
phone depending on its type.
