2
English
English
3
¤
WARNING
Stop the car before operating the unit.
Important to know...
■
■
To prevent a short circuit, never put or leave
any metallic objects (such as coins or metal
tools) inside the unit.
■
■
Caution:
Adjust the volume so that you can
hear the sound outside the car. Driving with
the volume adjusted to a too high level may
cause an accident.
■
■
Condensation:
When the car is air-
conditioned, moisture may collect on the
laser lens. This may cause disc read errors. In
this case, remove the disc and wait for the
moisture to evaporate.
■
■
The illustrations in this manual are examples
used to explain more clearly how the
controls are used. Therefore, what appears
on the illustrations may differ from what
appears on the actual equipment.
■
■
If you experience problems during
installation, consult your Kenwood dealer.
■
■
When you purchase external components,
check with your Kenwood dealer to make
sure that they work with your model and in
your area.
Safety
Preparation
How to attach/detach the faceplate
1
2
1
2
■
■
Do not expose the faceplate to direct
sunlight, excessive heat, or humidity. Also
avoid places with too much dust or the
possibility of water splashing.
■
■
Keep the faceplate in its casing while
detached.
■
■
The faceplate is a precision component of
the unit and can be damaged by shocks or
jolts.
■
■
To prevent deterioration, do not touch the
terminals of the unit and faceplate with your
fingers.
How to reset your unit
3
If this unit fails to operate
properly, press the reset
button.
The unit returns to the
factory settings when the
reset button is pressed.
Reset button
1
2
Remote controller
KDC-BT47SD
can also be remotely controlled
with an optionally purchased remote
controller.
Maintenance
Cleaning the unit:
Wipe off the dirt on the
panel with a dry silicon or soft cloth. Failure
to observe this precaution may result in
damage to the monitor or unit.
Cleaning the connector:
The unit may
not function properly if the connectors
between the unit and faceplate are
dirty. Detach the faceplate and clean the
connector with a cotton swab gently, being
careful not to damage the connector.
Connector (on the reverse
side of the faceplate)
■
■
The “AAC” logo is a trademark of Dolby
Laboratories.
■
■
SDHC Logo is a trademark of SD-3C, LLC.
■
■
The Bluetooth word mark and logos are
owned by the Bluetooth SIG, Inc. and
any use of such marks by JVC KENWOOD
Corporation is under license. Other
trademarks and trade names are those of
their respective owners.
■
■
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has
been designed to connect specifically
to iPod, or iPhone, respectively, and has
been certified by the developer to meet
Apple performance standards. Apple is
not responsible for the operation of this
device or its compliance with safety and
regulatory standards. Please note that the
use of this accessory with iPod, or iPhone
may affect wireless performance.
■
■
iPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
■
■
“Adobe Reader” is a trademark of Adobe
Systems Incorporated.
