22
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Wiring connection
(for
)
INSTALLATION/CONNECTION
When connecting to an external amplifier, connect
its ground wire to the car’s chassis to avoid damaging
the unit.
If your car does not have an ISO terminal:
We recommend installing the unit with a commercially
available custom wiring harness specific for your car and
leave this job to professionals for your safety. Consult
your car audio dealer.
Pin
Color and function
A4
Yellow
: Battery
A5
Blue/White*
1
: Power control
A7
Red
: Ignition (ACC)
A8
Black
: Earth (ground) connection
B1
Purple
]
: Rear speaker (right)
B2
Purple/black
[
B3
Gray
]
: Front speaker (right)
B4
Gray/black
[
B5
White
]
: Front speaker (left)
B6
White/black
[
B7
Green
]
: Rear speaker (left)
B8
Green/black
[
Connecting the ISO connectors on some VW/Audi or Opel
(Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring
harness as illustrated below.
Unit
Vehicle
A7 (Red)
Ignition wire (Red)
A4 (Yellow)
Default wiring
Battery wire (Yellow)
Light blue/yellow
(Steering remote control
wire)
To the steering wheel remote control
adapter
Blue/White*
2
(Power control wire/
Antenna control wire)
Brown
(Mute control wire)
To the power control terminal when
using the optional power amplifier
or to the antenna control terminal in
the vehicle
To the terminal that is grounded
when the telephone rings or during
conversation
( 18)
(To connect the Kenwood navigation
system, refer your navigations manual.)
Yellow (A4)
Red (Ignition wire)
Red (A7)
Yellow (Battery wire)
ISO connectors
If no connections are made, do not let the wire come out from
the tab.
Fuse (10 A)
Antenna terminal
Output terminals
NOTE: Total output for Blue/White wire (
*
1
) + (
*
2
) is 12 V
350 mA.
JS_KWD_KDC_220UI_MN_EN_3.indd 22
JS_KWD_KDC_220UI_MN_EN_3.indd 22
6/14/2017 8:59:33 AM
6/14/2017 8:59:33 AM