20
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
INSTALLATION/CONNECTION
Do the required wiring.
( 21, 22)
Dashboard of
your car
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
How to remove the unit
1
Detach the faceplate.
2
Fit the catch pin on the extraction keys
into the holes on both sides of the trim
plate, then pull it out.
3
Insert the extraction keys deeply into
the slots on each side, then follow the
arrows as shown on the illustration.
Installing the unit (in-dash mounting)
Hook on the top side
Orientate the trim plate as
illustrated before fitting.
When installing without the mounting sleeve
1
Remove the mounting sleeve and trim plate from the unit.
2
Align the holes in the unit (on both sides) with the vehicle mounting bracket
and secure the unit with screws (supplied).
The following screws are supplied for:
/
/
:
Round head screws (M5 × 8 mm)
× 4
To secure the mounting
bracket
Flat head screws (M5 × 8 mm)
× 4
Sems screws (M4 × 8 mm)
× 1
To secure the ground
wire (black)
:
Round head screws (Ø5 × 8 mm)
× 4
To secure the mounting
bracket
Flat head screws (Ø5 × 8 mm)
× 4
Sems screws (M4 × 8 mm)
× 1
To secure the ground
wire (black)
Use only the specified screws. Using wrong screws might damage the unit.
– – – – – or – – – – –
JS_KWD_KDC_220UI_MN_EN_3.indd 20
JS_KWD_KDC_220UI_MN_EN_3.indd 20
6/14/2017 8:59:32 AM
6/14/2017 8:59:32 AM
