12
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
AUDIO SETTINGS
While listening to any source...
1
Press
AUD
to enter
[AUDIO CONTROL]
directly.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
(or using the remote control)
1
Press
AUD
to enter
[AUDIO CONTROL]
.
2
Press
J
/
K
to select an item, then press
.
Default:
XX
AUDIO CONTROL
SUB-W LEVEL
–15
to
+15
(
0
)
Adjusts the subwoofer output level.
BASS LEVEL
–8
to
+8
(
+2
)
Adjusts the level to memorize for each source.
(Before making an adjustment, select the source you
want to adjust.)
MID LEVEL
–8
to
+8
(
+1
)
TRE LEVEL
–8
to
+8
(
+1
)
EQ PRO
(This setting is stored to
[USER]
.)
BASS ADJUST
BASS CTR FRQ
60HZ
/
80HZ
/
100HZ
/
200HZ
or
60
/
80
/
100
/
200
:
Selects the center frequency.
BASS LEVEL
–8
to
+8
(
+2
): Adjusts the level.
BASS Q FACTOR
1.00
/
1.25
/
1.50
/
2.00
: Adjusts the quality factor.
BASS EXTEND
ON
: Turns on the extended bass. ;
OFF
: Cancels.
MID ADJUST
MID CTR FRQ
0.5KHZ
/
1.0KHZ
/
1.5KHZ
/
2.5KHZ
: Selects the
center frequency.
MID LEVEL
–8
to
+8
(
+1
): Adjusts the level.
MID Q FACTOR
0.75
/
1.00
/
1.25
: Adjusts the quality factor.
TRE ADJUST
TRE CTR FRQ
10.0KHZ
/
12.5KHZ
/
15.0KHZ
/
17.5KHZ
: Selects the
center frequency.
TRE LEVEL
–8
to
+8
(
+1
): Adjusts the level.
PRESET EQ
DRIVE EQ
/
TOP40
/
POWERFUL
/
ROCK
/
POPS
/
EASY
/
JAZZ
/
NATURAL
/
USER
: Selects a preset equalizer suitable to the music genre.
(Select
[USER]
to use the settings made in
[EQ PRO]
.)
[DRIVE EQ]
is a preset equalizer that reduces noise outside the car or
running noise of the tyres.
BASS BOOST
LEVEL1
/
LEVEL2
/
LEVEL3
or
LV1
/
LV2
/
LV3
: Selects your preferred bass
boost level. ;
OFF
: Cancels.
LOUDNESS
LEVEL1
/
LEVEL2
or
LV1
/
LV2
: Selects your preferred low and high
frequencies boost to produce a well-balanced sound at a low volume
level. ;
OFF
: Cancels.
SUBWOOFER SET
ON
: Turns on the subwoofer output. ;
OFF
: Cancels.
LPF SUBWOOFER
THROUGH
: All signals are sent to the subwoofer. ;
85HZ
/
120HZ
/
160HZ
: Audio signals with frequencies lower than
85 Hz/120 Hz/160 Hz are sent to the subwoofer.
SUB-W PHASE
REVERSE
(180°)/
NORMAL
(0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than
[THROUGH]
is selected for
[LPF SUBWOOFER]
.)
JS_KWD_KDC_220UI_MN_EN_3.indd 12
JS_KWD_KDC_220UI_MN_EN_3.indd 12
6/14/2017 8:59:29 AM
6/14/2017 8:59:29 AM
