52
ENGLISH
REMOTE CONT
STEERING WHEEL
REMOTE INPUT
P.CONT
ANT.CONT
ILLUMI
MUTE
STEERING
REMOTE
ST REMOTE
GND
Input 1
Input 2
REVERSE
PRK SW
π
Installation and Connection
Installation and Connection
10 A fuse
Connect the antenna cord to the
antenna terminal.
USB1 input terminal (1 m)
Purple with white stripe
Light blue with yellow stripe
Red (Ignition wire)
Yellow (Battery wire)
Light green
To the car’s reverse lamp harness when using the optional rear view camera
To the OE remote adapter (not supplied) which is compatible with your car
To the power control terminal when using the optional power amplifier (Or)
To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna
Not used.
Extension parking cable (
ø
)
To the car’s parking brake detection switch harness
(For best safety, be sure to connect the parking
sensor.)
Brown
For DMX7019BT/DMX7019BTM/DMX719WBT (Indonesian models)
Black (Ground wire)
Blue with white stripe (12 V
350 mA)
Orange with white stripe
Purple
]
/ Purple with black stripe
[
Green
]
/ Green with black stripe
[
Gray
]
/ Gray with black stripe
[
White
]
/ White with black stripe
[
To the car light control switch
To rear speakers /tweeter speakers* (right)
To rear speakers /tweeter speakers* (left)
To front speakers /mid range speakers* (right)
To front speakers /mid range speakers* (left)
Ignition key switch
To the car chassis
Car fuse
Car battery
Gray/Red
Bright green/Red
Purple/Red
Connect to your vehicle’s
steering remote harness.
Contact your KENWOOD
dealer for details.
* For 3-way speaker system connection, see also page 55.
USB2 input terminal (1 m)
(USB1) 5 V
1.5 A
(USB2) 5 V
1.5 A
04_DDX7019BT_TC_M_Body02.indd 52
04_DDX7019BT_TC_M_Body02.indd 52
18/6/2019 9:54:42 AM
18/6/2019 9:54:42 AM