50
ENGLISH
Installation and Connection
Installation and Connection
Parts list for installation
Note:
• This parts list does not include all the package
contents.
• Items
“
is supplied only for
DDX7019BT
/
DDX7019BTM
/
DMX7019BT
/
DMX7019BTM.
• Item
]
is supplied only for
DMX7019BT
Australian/
New Zealand models.
• Item
‘
is supplied only for
DDX7019BTM
/
DMX7019BTM
/
DMX7019BT
Australian/New Zealand
models/
DDX719WBT
/
DDX719WBTM
/
DMX719WBT
/
DMX719WBTM.
¥
Wiring harness (× 1)
ø
Extension parking cable, 2 m (× 1)
π
Steering wheel remote input cable (× 1)
[
Round head screws, M5 × 8 mm (× 6)
“
Flat head screws, M5 × 8 mm (× 6)
]
Trim plate (× 1)
‘
Microphone, 3 m (× 1)
Installation procedure
1
Remove the key from the ignition and
disconnect the
·
battery.
2
Make the proper input and output wire
connections for each unit.
3
Connect the speaker wires of the wiring
harness.
4
Connect the wires of the wiring harness
in the following order: ground, battery,
ignition.
5
Connect the wiring harness to the unit.
6
Install the unit in your car.
Make sure that the unit is installed securely in place.
If the unit is unstable, it may malfunction (e.g., the
sound may skip).
7
Reconnect the
·
battery.
8
Configure <Initial SET-UP>. (Page 6)
Installing the unit
Installing the unit using the mounting
bracket removed from the car
[
/
“
[
/
“
Note:
Select the appropriate screws (supplied) for the
mounting bracket.
Installing the trim plate
(Only for
DMX7019BT
Australian/New Zealand
models)
Car bracket
00_EN_DDX7019BT_TC_M.indb 50
00_EN_DDX7019BT_TC_M.indb 50
4/16/2019 9:27:27 AM
4/16/2019 9:27:27 AM