Kenwood DDX6019BT, Инструкция по эксплуатации

Страница: 34 / 68

32 ENGLISH
KENWOOD Music Mix
When “Bluetooth” is selected as the source, you can
connect up to five Bluetooth audio devices at the
same time. You can easily switch between these five
devices.
• Some operations may not work depending on the
setting made between this unit and your device.
1
Display <KENWOOD Music Mix> screen.
On the source control screen, touch as follows:
• When you change to another source from
“Bluetooth”, the connection is restored to the device
connected as [ ].
Playback information and key operation
• For playback information, see “Source control screen”
on page 10.
• For key operations on the touch panel, see “Common
operation keys on source control screen” on
page 10.
Selecting a track from the list
1
Display the music list.
On the source control screen, touch as follows:
2
Select the folder, then the item in the
selected folder.
• For details about the list operation, see
page 11.
Bluetooth® Bluetooth®
A
: Device used as usual Bluetooth audio
device and at the same time, being able to
used as device for KENWOOD Music Mix.
– Touch to go to <Select Device> screen.
(Page 27)
: Device used for KENWOOD Music Mix.
– (white): Not connected.
– (purple): Connected.
B
: Status of playback device.
– (purple): Current playback device.
– (white): Ready for playback.
– (gray): Not ready for playback.
2
Connect the device to use as a device for
KENWOOD Music Mix.
Touch those icons that light up in white.
• To disconnect, touch the icon again.
3
Select the device to start playback.
Touch those icons that light up in white.
Note:
• Once another device (any other than the device
connected as [ ]) is selected to play music, the
connection is switched to the new selected device.
00_EN_DDX719WBTL_TC_R.indb 32 00_EN_DDX719WBTL_TC_R.indb 32 5/23/2019 9:33:12 AM 5/23/2019 9:33:12 AM