<DivX(R) VOD>
(Only for
DDX419BT
)
This unit has its own Registration Code. Once you
have played back a file with the Registration Code
recorded, this unit’s Registration Code is overwritten
for copyright protection.
• Touch
[Enter]
to display the information.
• To return to the previous screen, touch
[OK]
.
<Security Code>
(Only for
DDX419BT
)
Register the security code for the unit. (Page 6)
<Serial Number>
(Only for
DDX396/DDX376BT/DDX276BT/DDX26BT)
Displays the serial number.
<Touch Panel Adjust>
Adjust the touch positions of the buttons on the
screen.
Touch the center of the marks at the upper left (
1
),
the lower center (
2
), then the upper right (
3
) as
instructed.
Cancel Reset
Touch Panel Adjust
• To reset the touch position, touch
[Reset]
.
• To cancel the current operation, touch
[Cancel]
.
<Steering Remote Control Setting>
(Only for
DDX419BT
)
Assign functions to the keys of the remote controller
on the steering wheel.
• This function is available only when your car is
equipped with the electrical steering remote
controller.
• You can only register/change the functions while
you are parked.
• If your steering remote controller is not compatible,
learning may not be completed and an error
message may appear.
• For connection, see page 57 for more information.
1
Touch [Set] for <Steering Remote Control
Setting> to display the setting screen.
2
Press and hold a button on the steering
remote controller to register or change.
3
Select a function to assign to the selected
button.
Steering Remote Control Setting
VOL
Please select the function to assign to the button.
VOL
ATT
SRC
Done
Settings
Settings
4
Repeat steps 2 and 3 to register other
buttons.
5
Touch [Done] to finish the procedure.
• The unit can register/change all of the buttons’
functions at the same time. To do this, press all
buttons in turn and after pressing all of them, touch
[Done]
on the
<Steering Remote Control Setting>
screen. However, new functions cannot be learned
after this operation.
• When changing the functions already learned, touch
the assigned function you want to change in step 3
and then touch to select the new function from the
function list.
• Confirm the contents of the settable functions in the
function list. You cannot edit the function list.
To initialize the setting:
Touch
[Initialize]
for
<Steering Remote Control Setting>
.
• A confirmation message appears. Touch
[Yes]
.
–
To cancel the initialization, touch
[No]
.
47
ENGLISH
00_DDX_2019ST_KN_RN.indb 47
00_DDX_2019ST_KN_RN.indb 47
31/5/2018 2:44:29 PM
31/5/2018 2:44:29 PM
