ENGLISH
61
CONNECTION/INSTALLATION
CONNECTION/INSTALLATION
❏
Connecting external components
1
NAVI I/F input*
1
2
Steering wheel remote controller input*
1
• Connect to the vehicle’s steering remote
harness. Contact your Kenwood dealer for
details.
3
iPod/Audio Video input (iPod/AV-IN)*
2
4
Video output (Yellow)
5
Rear preout*
3
• Audio left output (White)
• Audio right output (Red)
6
DAB aerial input*
4
7
Front preout*
3
• Audio left output (White)
• Audio right output (Red)
8
Subwoofer preout*
3
• Subwoofer left output (White)
• Subwoofer right output (Red)
9
Rear view camera input (Yellow)
*
1
Only for DDX4016DAB/DDX4016BT.
*
2
When connecting the component to play on
“AV-IN”
, use the
Audio and Video cable CA-C3AV (optional accessory).
*
3
When connecting an external amplifier, connect its ground wire to
the chassis of the car; otherwise the unit may be damaged.
*
4
Only for DDX4016DAB. To use the digital radio, connect CX-DAB1
(optional accessory).
Connecting external amplifiers for a 3 way
speaker system
Tweeter preout
Mid range preout
Woofer preout
RCA cable (not supplied)
Speaker
*
*
When connecting to an external amplifier, connect its ground wire
to the car’s chassis.
2016DDX-Entry̲E.indb 61
2016DDX-Entry̲E.indb 61
2015/09/30 16:23
2015/09/30 16:23