46
SETTINGS
SETTINGS
Sound adjustment
❏
Using the sound equalization
• The adjustments are memorized for each source
until you adjust the sound again. If the source is
a disc, the adjustments are stored for each of the
following categories.
– DVD/VCD
– CD
– DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC
• You cannot adjust the sound when the unit is in
standby.
Selecting a preset sound mode
1
Display the
<Equalizer>
screen.
On the Home screen:
2
Select a sound mode
.
• You can change the page to display more
items by pressing [
]/[
].
• You can also display the
<Equalizer>
screen by
pressing [
] on the source control screen.
Storing your own adjustments—Adjusting the
sound precisely
1
Select a sound mode. (See the left column.)
2
Select a band and adjust the level of the
selected band.
• You can adjust the level by dragging the slider
or using [
J
]/[
K
].
• Repeat this step to adjust the level of other
bands.
The adjustments are stored and
<User>
is
activated.
3
Adjust the sound.
<Q factor>
Adjusts the width of the
frequency.
<Bass EXT>
Activates (
[ON]
)/deactivates
(
[OFF]
) bass.
<SW LEVEL>
Adjusts subwoofer level.*
• To apply the adjusted equalizer to all playback
sources, press
[ALL SRC]
, then press
[OK]
to
confirm.
• To clear the adjustment, press
[EQ INT]
.
*
Not adjustable when
<None>
is selected for subwoofer on the
<Speaker Select>
screen. (Page
47)
❏
Setting the crossover network mode
Select the appropriate crossover network mode
according to the speaker system (2-way speaker
system or 3-way speaker system).
1
Put the unit in standby.
2
Press
M
and AV on the monitor panel at
the same time to display the
<X’over
Network>
screen.
3
Select the crossover network mode.
[2 way]
Select this when connecting speakers
in a 2-way system (front/rear).
[3 way]
Select this when connecting speakers
in a 3-way system (tweeter/mid
range/woofer).
A confirmation message appears. Press
[Yes]
.
2016DDX-Entry̲E.indb 46
2016DDX-Entry̲E.indb 46
2015/09/30 16:22
2015/09/30 16:22
