Kentrox DataSMART T3/E3 IDSU, Руководство по установке

Страница: 6 / 52

6 Preface
About this manual
This manual contains the following information:
“Preface” (this section) explains the purpose and organization of this manual and
explains how to contact Kentrox Customer Support if you should run
into difficulties.
“Getting started” describes site and environmental requirements and shows how
to unpack and inspect the shipment.
“Preparing the hardware for installation” describes how to change the IDSU con-
trol port terminal settings via the internal DIP switch.
“Initial installation and power up” explains how to mount the unit on a desktop or
in a standard equipment rack, and how to power up both the AC and the
DC models.
“Cabling interfaces and ports” shows how to connect cables to the network inter-
face, the data port, and the control port. This chapter also shows how to set up
daisy-chaining.
“Initial configuration” gives step-by-step instructions for configuring the IDSU
and its various interfaces and ports for the first time.
“Appendix A” lists the pinouts for the network interface, data ports, and
control port.
“Appendix B” describes the front-panel thumbwheel switch and push-buttons.
This manual also contains an index.
Related
documentation In addition to this manual, you will have received:
■
DataSMART T3/E3 IDSU User’s Guide
The user’s guide provides detailed information about all of the product features. It
contains comprehensive configuration information, troubleshooting guidelines, a
complete glossary, and a quick-reference to all of the product forms and functions.
MIB source files MIB source files are available by visiting: http://www.kentrox/support .