Kentrox DataSMART T3/E3 IDSU, Руководство по установке, Страница: 37 / 52

37
C H A P T E R
5
Initial configuration
This chapter takes you through the minimum configuration steps needed to verify that the
DataSMART T3/E3 IDSU is active and functioning properly. After completing these
steps, your network and data port LEDs should be “yellow” and you can proceed to your
DataSMART T3/E3 IDSU User’s Guide for additional configuration or performance
monitoring information.
Topics covered include:
■ Network configuration ( page 39 )
■ Data port configuration ( page 40 )
■ Verifying the configuration ( page 41 )
Procedures for setting up SLIP Telnet or IP access to the DataSMART T3/E3 IDSU are
provided in Chapter 7 of your user’s guide.