Kenton Control Freak ORIGINAL Скачать руководство пользователя страница 47

Страница: 47 / 59

CONTROL FREAK

CUBASE VST USERS

Cubase VST users

Controlling Cubase VST from the Kenton Control Freak

Since 3.7 PC / 4.1 Mac, the ability to control various real-time parameters

within VST has been available using a hardware remote device. In the current

versions it is only possible to control the volumes, pans, mutes and solos on

the audio mixer, plus transport functions – this is due to limitations of VST

itself, not of the Freak. However, later versions of VST may offer a greater

degree of control.

All new Control Freak units come pre-programmed with profiles to control

the VST audio mixer. Control Freak owners with an earlier software revision

than 4501.289 (4501.422 for Original Freak) will not have these profiles but

can download them from our website www.kenton.co.uk, where there is also

a profile for controlling transport.

Configuring VST to recognise the Control Freak

Firstly, it is essential that in VST you select the Roland MCR8 as your remote

controller. Go to the audio drop down menu and select VST remote.

In the VST remote
window select Roland MCR8.

Set input to be from your soundcard.

Note:Your Freak must be set to MIDI
channel 16 or VST will not see it
(Kenton profiles are already set to the
correct channel).

Plug-in instruments such as the Pro-
Five and Model-E can also be
controlled with the Control Freak.
Profiles will be available from our
website shortly.

Yamaha DSP Factory

DSP Factory owners can also control the DSP mixing desk inside VST from the

Control Freak. This is done by using a program called Auto DSP, which can be

downloaded from www.msmcleod.demon.co.uk.

Before you start VST, run the Auto
DSP program and select your
MIDI In device.

Then click on enable automation.

Finally, click on default.

Start VST and you will find that the

DSP mixer now responds to program

0 (volumes) on the Freak. All other

parameters on the DSP Factory card

can be controlled with the Freak –

you just have to set them up how you

want.

Содержание Control Freak ORIGINAL




























































Результаты поиска

Содержание Control Freak ORIGINAL

Отзывы:

Похожие инструкции для Control Freak ORIGINAL

Бренды по названию

Популярные бренды

Kenton Control Freak ORIGINAL, Руководство пользователя

Результаты поиска

Содержание Control Freak ORIGINAL

Отзывы:

Похожие инструкции для Control Freak ORIGINAL

Бренды по названию

Популярные бренды