21
ENGLISH
Setting Oven Controls
•
Setting the Clock
•
Changing between 12 or 24 hour display
•
Silent Control Operation
Setting the Clock
The
CLOCK
pad is used to set the clock. The clock may be
set for 12 or 24 hour time of day operation. The clock has been
preset at the factory for the 12 hour operation. When the range is
first plugged in, or when the power supply to the range has been
interrupted, the clock in the display will flash (See Fig. 1).
To set the clock (example below for 1:30):
1.
Press
.
"CLO"
will appear in the display (See Fig. 2).
2.
Press
pads to set the time of day to 1:30
(See Fig. 3). Press
. "CLO"
will disappear and the clock
will start (See Fig. 4).
Changing between 12 or 24 hour time of day display:
1.
Press and hold
for 6 seconds untill
"12h"
or
"24h"
appears in the display.
2.
Press
to switch between the 12 and 24 hour time of day
display.
"12h"
or
"24h" will be displayed
(See Figs. 5 or 6).
3.
Press
to accept the desired change or press
to
reject the change.
4.
Reset the correct time as described in
To set the clock
above.
Please note that if the 24 hour time of day mode was chosen,
the clock will now display time from 00:00 through 23:59 hours.
for 6 seconds
INSTRUCTIONS
PRESS
DISPLAY
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
or
Setting Silent Control Operation
The
DELAY START
and
FLEX CLEAN
pads control the Silent Control operation feature. The Silent Control
operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control
can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
for 6 seconds
1.
To tell if your range is set for normal or silent operation press
and hold
for 6 seconds. (See Fig. 7)
2.
Press
to switch between normal sound operation and
silent operation mode. The display will show either "
SP
" (See
Fig. 8) or "
- -
"
(See Figs. 2 or 3).
If "
SP
" appears (See Fig. 2), the control will operate with normal
sounds and beeps. If "
- -
" appears (See Fig. 9), the control is
set for silent operation mode.
3.
Press
to accept the change or press
to reject the
change.
or
INSTRUCTIONS
PRESS
DISPLAY
Fig. 7
Fig. 8
Fig. 9
To change control from normal sound to silent control operation:
Содержание 970-6600 Series
