manualshive.com logo in svg

Kenmore 795.58822.900, Руководство по обслуживанию

Поделиться
Скачать
Kenmore 795.58822.900 Скачать руководство пользователя страница 70

2. HANDLE 

To move the refrigerator through a house door, could be necessary to get off door handle.

1. Removing the door handle
-Loosen the set screws with the 3/32” Allen wrench and remove the handle.
Note: If the handle mounting fasteners need to be tightened or removed, use a 1/4” Allen wrench.

- 70 -

3. FAN SHROUD GRILLE

1)Loosen two screws after disconnecting a cap screw of a grille fan 
(U) with a screwdriver balde.
2) Disassembly of a grille fan (U): Pull forward after opening hook 
at part with a screwdrive blade.
3) Disconnect housing A of a grille fan (L) from the main body.
4) Disassembly of a grille fan (L): Hold upper part of a grille fan (L) 
and pull forward carefully.
5) Loosen two screws.
6) Disassembly of shroud. F(U): Disconnect housing of B after 
removing two rail guides with a screwdriver blade.
7) Disassembly of shroud. F(U): Hold upper part and pull forward.
8) Check foam sticking conditions around a shroud, F(U) and F(L) 
during assembling. If damaged, torn, or badly stuck, assemble with 
a new one after sealing well.

Содержание 795.58822.900





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды