26
Care & Cleaning
Removing and replacing the lift-off oven door
To avoid possible injury
when removing or
replacing the oven door, follow the instructions below
carefully
and always hold the oven door with both hands
positioned
away from the door hinge area.
The door is heavy. For safe, temporary
storage, lay the door flat with the inside of the door facing
down.
To remove oven door:
1. Open oven door completely (horizontal with floor -
Fig.1).
2. Pull the door hinge locks on both left and right door
hinges down from the oven frame completely towards
the oven door (Fig. 2). A tool such as a small flat-blade
screwdriver may be required.
3. Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle - Fig. 3).
4. Close the door to the broil stop position (the oven door
will stop into this position just before fully closing).
5. With the oven door in the broil stop position, lift the
oven door hinge arms over the roller pins located on
each side of the oven frame (Fig. 4).
To replace oven door:
1. Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle - Fig. 3).
2. Holding the oven door at the same angle as the removal
position, seat the hook of the hinge arm over the roller
pins located on each side of the oven door frame
(Fig. 4). The hook of the hinge arms must be fully seated
onto the roller pins.
3. Fully open the oven door (horizontal with floor - Fig. 1).
4. Push the door hinge locks up towards and into the oven
frame on both left and right oven door hinges (Fig. 2) to
the locked position; then close the oven door.
Special door care instructions
Most oven doors contain glass that can break. Read the
following recommendations:
• Do not close the oven door until all the oven racks are
fully in place inside the oven cavity.
• Do not hit the glass with pots, pans, or any other object.
• Scratching, hitting, jarring or stressing the glass may
weaken its structure causing an increased risk of
breakage at a later time.
Oven door
hinge
locations
Fig. 3
Fig. 1
Fig. 2
Fig. 4
LOCK
roller
pin
hinge
arm
about
10°
hinge
oven
door
