16
Oven Controls
Changing between continuous bake setting or 12-hour
energy saving feature
The oven control has a factory-preset 12-hour energy saving
feature that will turn the oven off automatically if the oven is
left on for more than 12 hours. The control may be programmed
to override this feature to continuously bake.
To change to continuous bake mode:
Press and hold Timer ON/OFF until the control beeps once
(about 6 seconds). Cont will appear in display. The control is set
for continuous bake. Press Self Clean to toggle between contin-
uous bake and 12hr energy saving. 12 Hr will appear in display
for energy saving mode.
To save the selected mode, press START. The display will return
to idle.
Setting Timer
The timer may be set from 1 minute to 11 hours and 59 minutes.
To set the timer:
1.
Press
Timer ON/OFF
.
2.
Press and hold
to increase the time. Release
when the desired time appears in the display.
3.
Press
START,
and the timer will begin to count down.
4.
When the set time has run out, the timer will sound with
three beeps and will continue to beep three times every 60
seconds until
Timer ON/OFF
is pressed.
To change time remaining in timer, press and hold
or
to increase or decrease any time remaining.
To cancel the timer before at any time, press
Timer ON/Off
once.
Important notes:
•
The timer does not start or stop the cooking process. It
serves as an extra timer in the kitchen that will beep when
the set time has run out. The timer may be used alone or
when any other oven function is active.
•
The indicator light located above
Timer ON/OFF
will glow
when the timer is active.
•
The timer will display hours and minutes until 1 hour
remains. When less than 1 hour remains, the display will
count down in minutes and seconds. Once the timer has less
than 1 minute remaining, only seconds will display.
•
If the timer is active when oven cooking, the minute timer
will show in the display by default. To view information of
any other active oven function, press the key once for the
active function to view status.
Setting Bake
Use the bake function whenever the recipe calls for baking
using normal temperatures. A reminder tone will sound when the
set bake temperature is reached. Bake may be programmed
for any temperature from 170°F to 550°F (77°C to 288°C).
The factory preset bake temperature is 350°F (177°C).
Always use pot holders or oven mitts when using
the oven. When cooking the oven interior, oven racks and cook-
top will become very hot which can cause burns.
To set Bake
1.
Arrange oven racks and close oven door.
2.
Press
Bake
.
350°
appears in display.
3.
Within 15 seconds, press
or
. The display will
show the default oven temperature of
350°F (177°C).
By
pressing
or
, the oven temperature may be
adjusted in 5°F increments (1°C).
4.
Press
START
when the desired temperature appears. The
oven will begin heating to the selected temperature. When
the oven temperature reaches the set temperature, the PRE-
HEAT indicator light will turn off, and the oven control will
beep three times.
To cancel bake at anytime, Press
.
To change the oven temperature after Bake has started:
1.
Press
Bake
. The current set oven temperature will display.
2.
Press
or
to increase or decrease the current set
temperature to the new oven temperature.
Important notes
:
•
The oven will bake no longer than 12 hours. If you wish to
bake for a longer period, see
“Changing between
continuous bake setting or 12-hour energy saving feature”
on
page 16
for detailed information.
STOP
STOP
Содержание 790.7400
Страница 31: ...31 Before You Call ...
Страница 32: ......
