21
Oven Controls
Warm & Hold™
Warm & Hold will keep cooked foods warm and ready for
serving for up to 3 hours after cooking has finished. After 3
hours, Warm & Hold will shut off automatically. Warm & Hold
should only be used with foods that are already at serving
temperatures. Warm & Hold will maintain the oven temperature
at 170°F (77°C).
To set Warm & Hold:
1.
If needed, arrange oven racks and place cooked food in
oven.
2. Press Warm & Hold. HLd will appear in the display. If no
other keys are touched within 25 seconds, the request for
Warm & Hold will clear.
3. Press START.
4. Warm & Hold will automatically turn off after 3 hours.
To turn Warm & Hold off at any time, press
.
To set Warm & Hold to start after a Timed Bake automatically
1.
Press
Bake
. Press
or
to set temperature.
2.
Press
START
.
3.
Press
Cook Time.
Press
or
to set time.
4. Press START.
5. Press Warm & Hold.
6. Press START. Warm & Hold is set to turn on automatically
after the Timed Bake or Delay Timed Bake has finished. The
Warm & Hold indicator light will glow indicating that the
Warm & Hold feature is set to start when the timed bake is
finished.
Operating Oven Light
The oven light will automatically turn on when the oven door is
opened.
Press
LIGHT
to turn the oven light on or off whenever the oven
door is closed. The oven light will not operate during the self
clean operation.
The oven light is located at the upper left rear wall of the oven
interior and is covered with a glass shield held in place by a
wire holder. The glass shield protects the bulb from high tem-
peratures and should always be in place when the oven is in
use.
To replace the interior oven light, see
“Replacing oven light
(some models)”
on
page 26
.
Adjusting oven temperature
The appliance has been factory calibrated and tested to ensure
an accurate baking temperature, known as the User Preference
Offset (UPO). For the first few uses, follow your recipe times
and temperature recommendations carefully. If you think the
oven is cooking too hot or too cool for your recipe times, you
may adjust the control so the oven cooks hotter or cooler than
the oven temperature displayed.
The oven temperature may be increased as much as +35°F
(+19°C) or decreased -35°F (-19°C) from the factory cali-
brated settings.
To adjust oven temperature:
1.
Press
Bake
and hold for 3 seconds. The UPO value will
appear in the display with a degree sign.
2.
The display now indicates the amount of degrees offset
from the original factory temperature setting. If the control
still has the original factory calibration, the display will
read
0
.
3.
The temperature may be adjusted up or down 35°F (19°C),
in 1°F increments by pressing and holding
or
.
Adjust until the desired amount of temperature offset
appears in the display and press
START
to save.
4.
If the
STOP
key is pressed during the programming mode,
the UPO value will remain unchanged.
Important notes:
•
Oven temperature adjustments made will not change the
Broil or Self-Clean operating temperatures.
•
Do not use oven thermometers such as those found in
grocery stores to check the temperature settings inside your
oven. These oven thermometers may vary as much as 20°F
to 40°F degrees from actual temperatures.
•
The oven temperature adjustment may be made if your
oven control has been set to display °C temperatures.
Minimum and maximum settings for °C is plus (+) or minus
(-) 19°C.
•
If the display mode is set for °C, adjustments made will be
in 1°C increments on each press of
or
.
STOP
STOP
Содержание 790.7400
Страница 31: ...31 Before You Call ...
Страница 32: ......
