Kenmore 501-80002, Руководство пользователя

Страница: 18 / 56

18
Reverse the door
The door can be reversed to fit to your own
installation conditions. From the factory, the door
hinge is located on the right side.
4. Detach both
hinge point
covers.
5. Unscrew two
door hinges.
6. Replace both
hinge point
covers where
door hinge is
located.
7. Replace the
door catch to
the reverse
location.
8. Tighten the
screws in the
door hinges.
2. Remove the
door lock
cover.
1. Unscrew the
bottom hinge of
the door first
and top hinge.
And then place
on the blanket
to prevent
scratches.
3. Remove the
door lock and
replace where
door lock
cover is
located.
Caring
For
Your
D
ryer
C
F
aring For Your Dryer
1. This work may cause the injury of your hands
so you must be careful to handle some sharp
devices like torx screwdriver or slotted
screwdriver.
2. When the door is revered, the hand sticker on
the door also must be replaced.
Do not use an electric screwdriver.
Note