18
TRAÎNEAU
ACCESSOIRES
TUYAU
Pivot de
tuyau
Réglage
d’aspiration
Poignée
Interrupteur à trois positions
(OFF/ Floor / Carpet)
(Arrête/Plancher/Moquette)
Objet Pièce N
o
.
Pièce N
o
.
aux au
Etats-Unis
Canadá
Sac à poussière
20-50557
20-50410
Filtre d’échappement
20-86889
20-40324
Filtre de sécurité
20-86883
20-40321
du moteur
5
FRAN
Ç
AIS
BELT CHANGING AND AGITATOR CLEANING
TO REMOVE BELT
1. Turn Power-
Mate
®
upside
down.
2. Unscrew the
two (2) Power-
Mate
®
cover
screws.
3. Turn Power-
Mate
®
right side
up. Press handle
release pedal and
lower the swivel.
Lift rear latches
up.
4. To remove cover,
grasp the sides and
pull out.
5. Lift agitator
assembly out
and remove
worn belt.
6. Check and clean end cap areas. See
AGITATOR ASSEMBLY for picture of
complete agitator assembly.
Rear
Latches
Side
Latch
Base
End Cap
TO CLEAN AGITATOR:
NOTE: In order to keep cleaning efficiency
high and to prevent damage to your vacuum
cleaner, the agitator must be cleaned every
time the belt is changed.
The agitator must also be cleaned accord-
ing to the following schedule:
Vacuum Cleaner Use
Clean Agitator
HEAVY - every
week
(used daily)
MODERATE -
every month
(used 2-3 times/week)
LIGHT -
every 2 months
(used 1 time/week)
IMPORTANT
Disconnect vacuum cleaner from
electrical outlet. Check and remove hair,
string and lint build-up frequently in the
Power-Mate
®
agitator and end cap areas.
Remove any dirt or debris in the belt path
area or in the brush roller area.
Carefully remove any string or debris
located on the agitator or end caps.
End Cap
End Cap
Belt Path
Brush Unit
AGITATOR ASSEMBLY
