KEN STONE XN10-8, Руководство по эксплуатации

Страница: 13 / 174

Safety
General Precautions
●
Please be noted that, even if the safety
lock handle is placed at locking position,
the bulldozing blade, boom, and auxiliary
hydraulic controls can’t be locked.
Do not touch such controls accidentally.
●
While lifting up or lowering down the
safety lock handle, take cautions not to
touch any joystick.
Before leaving the driver seat, lower the
working device onto the ground, lift up the
safety lock handle to locking position, and stop
the engine. Meanwhile, ensure to withdraw the
key, close the doors and hoods, and carry the
key with you and then preserve it in a
designated place.
Guard against Fire and Explosion Dangers
Keep fuel, lubricating oil, grease, and antifreeze
away from flame. The fuel is especially
inflammable and really dangerous.
1-5
●
Handle these inflammable away from
ignited cigarette, match, lighter, and other
flame or fire source.
●
Do not smoke or use open fire while
handling fuel or performing the operations
of fuel system.
●
Do not leave the operation site while
filling fuel or lubricating oil.
●
Do not disassemble the fuel tank cap or
refuel while the engine is running or is not
cooled down. In addition, do not splash
fuel to any machine hot surface or
electronic system part.
●
Immediately clean the overflown fuel or
lubricating oil thoroughly.
●
Check for leakage of fuel and lubricating
oil. Please eliminate the leaks and clean
the machine before operations.
●
Please move the inflammable to a safe
place before polishing or welding
operations.
●
Do not cut or weld any pipeline or pipe
that probably contains inflammable liquid.
Please clean thoroughly by non-
inflammable solvent before cutting or
welding.
●
Remove all wastes and impurities from
machine. Ensure that there is no oil
contaminated rag or other inflammable on
the machine.
●
Handle all solvents and dry chemicals