- 3 -
3.Shipping and intermediate storage
3.1 Transport and shipping
The device must be properly shipped. The device was checked for compliance with all stated data before dispatching.
The device should therefore be in a flawless electrical and mechanical condition on arrival. To convince yourself of
that it is recommended to inspect the device for shipping damage upon acceptance. If there are any complaints
prepare a damage report together with the deliverer.
3.2 Intermediate storage
Intermediate storage must be dry and vibration-free in the original packing. The ambient temperature must not lie
outside the range of -0 to +50 °C.
4. Technical properties
- Volumetric flow display, optionally in: Litres/sec., Litres/min. (factory setting), Litre/h, m3/h, kg/h, kg/min.,
kg/sec. - Flow velocity display optionally in: m/sec (factory setting), m/min.
- Temperature display optionally in: 'C (factory setting), 'F, K
- Measurement input for ´Control-plus´ Flow and Temperature Sensor Valve, Figure 138 4G
- Measurement input for KHS flow sensor fitting Figure 638 4G
- Measurement input for KHS temperature measurement fitting Pt1000 Figure 628/629
- Measurement input for Temperature Sensor Pt100, Figure T5100 140 00 003
- Measurement input Temperature Sensor Pt100
- Measurement input 4-20mA optionally 0-20mA
- Measurement input 0-10 V
- Can save 4000 measurement data
- Measurement data storage optionally manual or as datalogger
- USB interface for PC link and measurement data analysis and evaluation
- Protection class IP65
- Size: 120x65x27
- Housing material: ABS, joint seal: TPE
- Device with permanently installed NiHM battery 5V/2Ah
- Battery charge current max. 500mA, charging time 4h
- Battery can be charged via USB interface with PC, USB power supply unit 230V (included in scope of delivery),
USB power supply unit 12V - Menu guidance in German, English or Dutch
5. Funktionselemente/Lieferumfang
5.1
Description of scope of delivery
:
- ´Control-plus’ Hand-held measuring instrument
- Carrying strap
- USB power supply unit 230V-5V
- ´Control-plus’ PC software
- USB adapter cable
- Control-plus’ M12x1 connection cable
1
3
4
2
5
1. Measurement cable input
2. Hand-held housing with surrounding joint seal
3. Graphic display with background lighting
4. Control via 4 keys: Up, Down, OK, Esc.
5. USB connection / Strap attachment
Caution!
Before switching on the NiHM battery for
the first time, charge min. 4h with the USB
adapter cable and the 230V power supply
unit or a PC.
