- 10 -
8. Connecting ´Control-plus’ pressure sensor Figure 138 00 006
8.1
Connection with 2m, M12x1 connection cable
The 2m, M12x1 ´Control-plus’ connection cable is required to connect the hand-held measuring instrument to
the flow sensor (optionally available, both ends are marked yellow).
8.2 Make measurement
1.
Use Esc in the main menu to switch (if not yet displayed in the main menu)
2.
Select submenu
Select Sensor
3.
Select submenu
Figure 138 00 006
4.
Go back to measurement display
5.
Measurement are shown
OK
2 X
1 X
OK
