Kemper Champion C 1200, Руководство по эксплуатации

Страница: 23 / 59

24 Attachment options
C1200
Conversion for front mounting
Swivelling bevel gear transmission
To adjust the machine for front mounting,
turn the bevel gear transmission.
To do this, you must dismantle both drive
shafts.
Remove the M8 screws from the shaft
safety guard.
Remove the guard.
It might be necessary to replace the
drive shafts with freewheel
transmissions.
Remove the two M8 screws and mount
the protective cap on the opposite side.
Remove the four M10 screws to the left
and right of the transmission.
Swivel protective plate
Before the transmission can be turned by
180°, replace the bleeder screw with a
seal screw. To do this, proceed as
follows:
- Turn the 90° transmission
- The oil remains in the transmission
- Replace the oil filler screw with
bleeder screw
- Turn gear further by 90° and secure
it
Turn the transmission once to its top
position.
Removing drive
shaft
Protective cap
Protective pate