Kemper 460plus, Руководство оператора

Страница: 72 / 112

Troubleshooting
Continued on next page KM00321,0000ABE -19-16JUN20-1/2
460
plus
StalkBuster™ Rotary Harvesting Unit
CAUTION: Before making any adjustments or
doing any service work, always:
- Switch the machine off
- Remove the key from the ignition
- Wait until all the moving parts have
come to a standstill.
Symptom Problem Solution
High output required if the harvest
result is poor Rotating blade segments are dull Replace the rotating blades.
Defective cleaners Install new cleaners.
Rubbing noises at the mower blade Rotor is dirty Clean the rotor. If possible, the cutting
area should be cleaned out before
the unit is used.
Defective cleaners Install new cleaners.
Rotary harvesting unit is vibrating Imbalance caused by dirty rotating
blades Clean the rotating blades.
Imbalance caused by asymmetrical
rotating blades Always replace the rotating blades
two at a time.
One of the cleaners is damaged Replace both cleaners.
Imbalance at rotating blade caused
by excessive vertical play Straighten the blades or install new
blades.
Stalks are pushed to the front
before they are cut (long, uneven
stubble) Leaves accumulated at the dividers Clean the dividers.
One of the cleaners is damaged Replace both cleaners.
Feeder house drums stop rotating Blockage in the feeding area Reverse the gathering drums briefly.
Reverse them repeatedly if necessary.
Worn skid shoes Replace.
Defective transmission See your Kemper dealer.
Transmissions overheating Too much oil or too little oil in the
transmission Check oil level in the transmission
and add or drain oil as necessary.
The gathering drums and rotating
blades refuse to start
Claw clutch defective See your Kemper dealer.
The entire left or right side of the
unit stops rotating Left or right friction clutch defective See your Kemper dealer.
The unit refuses to unfold or fold A foreign body (for example, grain of
sand) is obstructing the restrictor See your Kemper dealer.
Poor cut with widely spaced rows The unit is tackling seven rows of
plants. The middle row is hindering
the cut. Tackle only six rows of plants. Contact
your KEMPER dealer if necessary.
55-1 061721
PN=72