Kemper 460plus, Руководство оператора

Страница: 65 / 112

Operating the Rotary Harvesting Unit
KM00321,0000A8F -19-15MAY20-2/2
KM412039
—UN—15MA
Y20
1— Softkey
2— Softkey
3— Softkey
A—Additional Header Settings
Page
B—Minimum Ground Speed
C—Manual Lift Button D—Trigger Point for Lowering the
Mulching Units
3. Press softkey (3) to access the additional header
settings page (A).
4. Adjust minimum ground speed (B) and set the trigger
point (D) for lowering the mulching units.
Adjustable ranges of minimum ground speed and
trigger point:
•
Minimum ground speed: 1—3 km/h
•
Trigger point for lowering the mulching units:
0—100%
5. If the conditions (B) and (D) are fullfilled, lowering of the
Stalkbuster™ mulching units will start automatically.
NOTE: It is also possible to lift the Stalkbuster™ mulching
units manually with lift button (C).
Preconditons for the StalkBuster™ function:
•
Engine is switched ON.
•
Field mode is switched ON.
•
Main clutch is switched ON.
•
Cutterhead is switched ON.
•
Header drive is switched ON.
•
Manual lift button is switched OFF.
NOTE: All conditions must apply.
Required Settings for the StalkBuster™ Function:
All Preconditions applied
a
Ground Speed > Minimum
Ground Speed
Header Height < Trigger Point for
Lowering the Mulching Units
Action StalkBuster™
0 0 0 StalkBuster™ not lowering
0 0 1 StalkBuster™ not lowering
0 1 0 StalkBuster™ not lowering
0 1 1 StalkBuster™ not lowering
1 0 0 StalkBuster™ not lowering
1 0 1 StalkBuster™ not lowering
1 1 0 StalkBuster™ not lowering
1 1 1 StalkBuster™ not lowering
1 1 1 StalkBuster™ lowering
Required Settings for the StalkBuster™ Function:
a
See “Preconditions for the StalkBuster™ Function” in this section.
45-9 061721
PN=65