4 Notice for installation
Kelvinator Air Conditioning
Safety Precautions for Electric Appliances
1 A dedicated power supply circuit should be used for
products not supplied with a service cord and plug in
accordance with local electrical safety regulations.
3 The unit must be reliably earthed and connected to
the special earth device by the qualified electrician.
4 The circuit breaker must have the functions of magnetic
tripping and heat tripping to prevent short circuit
and overload.
5 The appliance shall be installed in accordance with
6 Including an circuit breaker with suitable capacity, please
note the following table.
Model
Note:
• Make sure the live wire, neutral wire and earth wire in
the power socket are properly connected.
• Inadequate or incorrect electrical connections may cause
electric shock or fire.
Earthing Requirements
1 Air conditioner is type I electric appliance. Please ensure
the unit is reliably earthed.
2 The yellow-green wire in air conditioner is the earthing
wire which can not be used for other purposes. Improper
earthing may cause electric shock.
3 The earth resistance should accord to the national
wiring regulation.
4 The user's power must have reliable earthing terminal.
Do not connect the earthing wire with the following:
1. Water pipe
2. Gas pipe
3. Contamination pipe
Installation Site Instructions
A proper installation site is vital for correct and efficient
operation of the unit. Avoid the following sites where:
• strong heat sources, vapours, flammable gas or volatile
liquids are emitted.
• high-frequency electro-magnetic waves are generated
by radio equipment, welders or medical equipment.
• salt-laden air prevails (such as close to coastal areas).
• the air is contaminated with industrial vapours and oils.
• the air contains sulphurous gas such as in hot spring
zones.
• corrosion or poor air quality exists.
Installation Site of Indoor Unit
1 The air inlet and outlet should be away from the
obstructions. Ensure the air can be blown through the
whole room.
2 Select a site where the condensing water can be
easily drained out, and where it is easily connected for
the outdoor unit.
3 Select a place where it is out of reach of children.
4 Select the place where the wall is strong enough to
withstand the full weight and vibration of the unit.
5 Be sure to leave enough space to allow access for routine
above the floor.
6
7 Select a place where the filter can be easily taken out.
8 Make sure that the indoor unit is installed in accordance
with installation dimension instructions (refer to page 5).
9 Do not use the unit in the laundry or by swimming
pool etc.
Installation Site of Outdoor Unit
1 Select a site where noise and outflow air emitted by unit
will not annoy neighbors.
2 Select a site where there is sufficient ventilation.
3 Select a site where there is no obstruction blocking the
inlet and outlet.
4 The site should be able to withstand the full weight
and vibration of the unit.
5 Select a dry place, but do not expose the unit to direct
sunlight or strong wind.
6 Make sure that the outdoor unit is installed in accordance
with the installation instructions, and is convenient for
maintenance and repair.
7 The height difference between indoor and outdoor units
complies with the table on page 8.
8 Select a place where it is out of reach of children.
16
16
25
maintenance. The installation site should be 2m or more
Select a place about 1m or more away from a TV set or
national wiring regulations.
Circuit Breaker (Amps)
10
10
25
32
32
32
KSE26CRC
KSE26HRC
KSE35CRC
KSE35HRC
KSE53HRC
KSE62HRC
KSE70CRC
KSE70HRC
32
KSE88HRC
KSE88CRC
any other electric appliance.
