background image

caution

1   The unit must only be installed by a qualified refrigeration 

mechanic and electrical work carried out by a qualified 
electrician according to local or government regulations 
and in compliance with this manual.

2   Before installation, please contact a qualified air 

conditioner installer. If the unit is not installed by a 
qaulified air conditioner installer, the malfunction may 
not be solved due to faulty installation.

3   If the supply cord is damaged, it must be replaced by 

the manufacturer, its service agent or similarly qualified 
persons in order to avoid a hazard.

4   The appliance must be positioned so that the plug 

is accessible.

5   The temperature of refrigerant circuit will be high, 

please keep the interconnection cable away from the 
copper tube.

6    This appliance is not intended for use by persons 

(including children) with reduced physical, sensory or 
mental capabilities,or lack of experience and knowledge, 
unless they have been given supervision or instruction 
concerning use of the appliance by a person responsible 
for their safety.

 

 Children should be supervised to ensure that they do not 
play with the appliance.

7   For appliances with type Y attachment,the instructions 

shall contain the substance of the following. If the 
supply cord is damaged,it must be replaced by the 
manufacturer, its service agent or similarly qualified 
persons in order to avoid a hazard.

warning

Before obtaining access to terminals, all supply circuits must 
be disconnected.

Please read this installation manual and the user manual 
before installation and carefully store in a handy place for 
later reference. Inside you will find many helpful hints on how 
to install and test the air conditioner properly. 
Electrical work must be installed by a licensed electrician. 
Be sure to use the correct rating of the power plug and main 
circuit for the model to be installed.
Incorrect installation due to ignoring this instruction will 
cause harm or damage, and the seriousness is classified by 
the following indications.
Meanings of symbols used in this manual are shown below:

warning

This symbol indicates information concerning your  
personal safety

caution

This symbol indicates information on how to avoid 
damaging the appliance

tips and information

This symbol indicates tips and information about  
use of the appliance

environmental tip 

This symbol indicates tips and information about 
economical and ecological use of the appliance

 

This symbol indicates never to do this

 

This symbol indicates always do this

Important safety instructions

Notice for installation

Kelvinator Air Conditioning 

 Important safety instructions/Notice for installation  3

Содержание KSE26CRC













Отзывы: