Kelly KBL36101, Руководство пользователя

Страница: 15 / 17

Kelly Kelly Kelly Kelly KBL KBL KBL KBL Brushless Brushless Brushless Brushless Motor Motor Motor Motor Controller Controller Controller Controller User User User User’’’’s s s s Manual Manual Manual Manual V V V V 3 3 3 3....1 1 1 1
Page 14
Table
Table
Table Table 1:
1:
1: 1: LED
LED
LED LED CODES
CODES
CODES CODES
Green
Green Green
Green LED
LED LED
LED Codes
Codes Codes
Codes
Red Red Red Red LED LED LED LED Codes Codes Codes Codes
LED Code Explanation
Solution
Green Off No power or not
operating 1. Check if all wires are correct.
2. Check fuse and power supply.
Green On Normal operation That’s great! You got solution!
Green and Red LED
Keep On
1. Software is upgrading.
2. Supply voltage too low or battery too high
3. The controller is damaged. Please contact Kelly
for warrantee.
LED Code Explanation Solution
1,2 ¤ ¤¤
Over voltage error
1. Battery voltage is higher than max operating
voltage of the controller. Please check the battery
voltage and configuration.
2. Over voltage at regeneration. Controller will cut
back or stop regeneration.
1,3 ¤ ¤¤¤
Low voltage error 1. The controller will attempt to clear the fault
code automatically after 5 second if battery
voltage returns to normal.
2. Check the battery voltage.
3. Charge battery if necessary.
1,4 ¤ ¤¤¤¤
Over temperature
warning
1. The controller temperature is over 90ºC. The
controller will cut back current in the case. Stop
or reduce output to ensure the temperature fall.
2. Improve heat sink or airflow
2,1 ¤¤ ¤ Motor fails to start 1. Motor hasn’t reached 25 electrical RPM after 2
seconds from starting. Most likely the hall or
phase wiring problem.
2,2 ¤¤ ¤¤ Internal voltage fault 1. Check if the B+ and PWR voltage are correct,
refer to B- or RTN. Could be PWR voltage low.
2. Please check load on 5V supply. Could be high
load on 5V. Incorrect pot wiring can load it
heavily
。
3. The controller is damaged. Please contact Kelly
for warrantee.
2,3 ¤¤ ¤¤¤
Over temperature
1. The controller temperature is over 100ºC.
Controller stops driving in the case.
2. Stop driving and wait for temperature fall. The
controller will restart if temperature drops below
80ºC.