Using the provided template in this booklet, mark the position
for the shower head on the cubicle wall and drill the hole making
sure the hole saw is the correct size.
Position shower head onto cubicle wall inserting pipe stubs
through the wall into the holes of the spacer, being careful not to
damage the pipe threads.
Place the pipe spacer onto the void wall and secure using the
screws supplied. Make sure the spacer is centered by using the
viewing windows in the spacer.
Remember!
Read through all instructions before beginning installation.
Always check for hidden pipes + cables before drilling.
Secure using the correct flange nuts supplied making sure not to
over-tighten.
1
2
3
4
!
Flex Head Installation
STEP 1
STEP 2
76mm
42.7mm
49.6mm
6.85mm
Ø
25mm
Ø
33mm
Ø
33mm
LEFT
VERTICAL
RIGHT
Place against wall in shower cubicle
LEFT
VERTICAL
RIGHT
TOP
TOP
Place against wall in shower cubicle
9
