Remember!
Before connecting hoses flush water inlet pipes with roughly 12 litres worth of water to reduce
risk of blockage from debris in pipes.
Attach air supply hose to the outlet air adapter on the Control
Hub. Tighten using a jubilee clip (supplied) with a screwdriver.
Attach air inlet hose to the inlet air adapter on the Control Hub.
Tighten using a jubilee clip (supplied) with a screwdriver. Ensure
hose connections are airtight. This can be done when first
running the shower.
Use the elbow connector and jubilee clip to connect the air outlet
hose to the shower head backplate. If air recirculation is suitable,
attach air return hose with remaining two jubilee clips.
1
2
3
4
!
Attach the remote flow sensor assembly to the water inlet pipe
by push fit, ensuring the water pipe is isolated first. IRN R008: The
flow sensor is to be installed where light is excluded.
Attach the remote flow sensor assembly to the water inlet in the
rear of the shower head backplate.
Flex Head Installation
10
