KELCH KENOVA set line V9 S Series, Руководство по эксплуатации

Страница: 9 / 38

1. Product liability and warranty
KENOVA set line V9xx(-S)
© Kelch GmbH 2014
Kelch GmbH · Werkstraße 30 · D-71384 Weinstadt-Endersbach · Tel. (+49)7151 20522 0 · Fax (+49)7151 20522 11 · info@kelchgmbh.de
Page 3
1.4 Intended Use
The tool setting device
KENOVA set line V9xx
is used for the gauging of tools. If you
have decided on a
KENOVA set line V9xx(-S)
, the device can also be used to shrink
tools in the shrink chuck provided for this purpose and cool this by means of a cooling
system. With ‘tool’, we mean in the following the
complete tool
, i.e. a tool in its adapter.
The temperature of tools must correspond roughly to the room temperature. Especially
tools, which have been previously heated up, must be cooled down before the gauging.
Use for any other purpose is considered to be an improper use.
KELCH GmbH
accept
no liability for damage resulting from this. The risk shall be borne solely by the operator.
Intended use also includes observance of the Operating Instructions, as well as adher-
ence to the inspection and maintenance intervals prescribed by
KELCH GmbH
.
Figure 1: Left: KENOVA set line V9xx with base frame and peripherals carrier, right: KENOVA set line
V9xx-S with base frame and peripherals carrier